|Aspect ratio||16:9 / 4:3 switchable|
|Viewing angle||H 178° / V 178°|
|Analogue audio input||Stereo 2 RCA|
|Audio meter||16 channels (Maximum 8 channels can be displayed at one time)|
|Component||480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60)|
|HDMI||480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60)|
|HD-SDI||1080i/60/59.94/50, 1080p/30/29.97/25/24/24sF/23.98/23.98sF, 720p/60/59.94/50|
|Input voltage||DC 12V 4 pin XLR|
|Power consumption (MAX)||≤11W|
|Store humidity||0%-90% No condensation|
|Dimension (mm)||L 207×H 147×D 38.5mm|
|Weight||About 1 kg|
|Installation||Up/Down 1/4 inch screw, Left/Right M6 screw|
|VESA connecting port||No|
The TL-701HDA 7 inch LCD small screen on camera monitor has the following functions:
Function setting button, 3D LUT loading, luminance waveform, audio meter, focus assistance, ELP (GPS in video), false color, safety marker, marker scale, blue only, mono, aspect ratio, over scan, under scan, pixel-to-pixel (PTP), battery with display meter, HDMI lock, safety lock, dynamic UMD, H/V DELAY
1. TALLY (indicator)
2. Protection bar
4. Sharpness / PTP
5. Saturation / Color B/W switch
6. Contrast / Volume
7. Brightness / OSD
8. Input signal switch
9. Status lock / unlock
10. Power indicator (red)
11. ZOOM jack
12. Headphone jack
■F1, F2, F3, F4 Shortcut (user-defined)
13. HDMI input
14. 3G/HD/SD-SDI output
15. 3G/HD/SD-SDI input
16. Composite I/ O
17. Audio input
18. Component (Y / Pr / Pb) input
19. Battery adaptor (optional)
20. TALLY signal
21. Power switch
22. DC 12V power input
23. HDMI adapter
The TL-701HDA screen adopts two kinds of luminance waveform of IRE and voltage luminance waveform. The basic function of these two measuring methods is that they can monitoring the range of luminance change of the video signal at real time.
16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.
The TL-701HDA can be equipped with zoom controller so that it can realize focus with sharp edges, thus saving focus time and improving focus effect.
False color can show the level of brightness (Y). It is a method enhancing image display. Warm color indicates higher exposure and cool color indicates low exposure. The color change from warm color to cool color is red, yellow, green, blue. So the image with higher brightness shows dark red while image with lower brightness shows dark blue. So false color is a direct method which has the similar function of luminance waveform, showing the luminance distribution of the image.
The safety marker of Ruige can be defined from 80%-90% by customers to avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.
The blue only is used for adjustment of the hue and saturation of the image. Meanwhile, it can be used to check the color calibration effect of the monitor.
Different aspect ratio can be chosen according to different signal formats to achieve perfect display effect.
During the making of the video program on net, the display mode and the equipment is the same with that during programming so there is no need to consider the limit of the safety marker with the over scan function. The image displayed on the monitor is that which will be seen by the terminal users.
Usage: Over scan is often used to programming for TV broadcast.
Because of the limit of monitor size and effective pixels, not all the monitors can show fully HD signal. So Ruige monitors use RPD technology (pixel to pixel function) to magnify image parts by parts to realize reappearing of 1080 original pixels.
Usage: This function can be used for the monitor with the resolution less than 1080. To view details, this function can avoid the loss of image detail due to lack of screen performance.
Beyond the normal image, the blanking area of field/horizontal signal is shown on screen.
In SDI signal, there is much useful information which is embedded in the blanking area of field/horizontal signal such as SDI Audio, CC (Closed Caption), etc.. It is necessary to check the information in the blanking area to make sure if these information has been embedded successfully.
Battery with display meter
When use battery to supply power to monitors, please enter the menu to 'Auxiliary Function' and open 'Battery Checker'. You will find one Battery meter displayed at the top-right corner of the monitor, calculating the remaining of battery capacity. When capacity is less than 30%, the scale meter color will be changed from Green to Red.
The unique humanized design has obtained the patent of China and the United States. Using the crocodile mouth clamping device, the HDMI cable can be fixed, which can effectively prevent the disconnection of the signal source or the instability of the connection caused by the loosening of the HDMI cable.
The safety lock can lock the function keys on the panel, thus avoiding poor shooting effect caused by mis-operation. When the system adjustment is done, just press the LOCK UP button for 3 seconds, the device will automatically enter the locked state. To remove the lock function, press the button for 3 seconds again. When the power is cut off, it remains locked, and will not automatically release.
D-tap power cable-4 pin XLR
D-tap 4 pins XLR power cable adopts copper cable with dual core which is 0.75m2.
It is made by ABS materials, filling with 0.5 mm sponge inside. It solves the interference of environment light for screen and also being foldable. It can protect the screen from impact after it is folded.
U type bracket-7 inch
It can connect the monitors or viewfinders to camera with U shape bracket hot shoe connector or 1/4 inch screw connector and also can realize different angle viewing monitoring.
DC-12V AC-DC adapter (4 pins XLR)
Input voltage: 100-240V ~1.0A 50/60HZ
Output voltage: DC-12V 4.0A
Certification: CE/FCC/3C/UL/ROHS etc.
HDMI plug lock
This HDMI lock is made of ABS engineering plastics. The unique humanized design adopts the crocodile mouth clamping device, which can effectively prevent the disconnection of the signal source or the instability of the connection caused by the loosening of the HDMI cable.
AC power cable
Standard: IEC 60320 C7
Core: copper 10AX3X0.75 square milimeters
External material: PVC flame proof plastics
Internal plug: H59#copper H62#copper nickel plated.
camera top monitor, video monitor, small LCD screen, monitor