|Resolution||1024 (H) ×600 (V)|
|Dot pitch||0.150 (H) ×0.050 (V) mm|
|Aspect ratio||16:9 / 4:3 Switchable|
|Back light||White LED|
|Color depth||8Bits(16.7M Color)|
|Viewing angle||H 150°/ V145°|
|Audio meters||16 Channels (Display 8 channels at the same time maximally)|
|Built-in loudspeaker||1 ×8 Ohm/0.5W (Pre)|
|HDMI||480p/60, 480i/60, 576i/50, 576p/50, 720p/50/60, 1080i/50/60, 1080p/24/25/30/50/60|
|HD-SDI||1080i/60/59.94/50, 1080p/30/29.97/25/24/24sF/23.98/23.98sF, 720p/60/59.94/50|
|Input voltage||DC 12V 2 pin DC plug with lock|
|Power consumption (MAX)||≤15W|
|Store humidity||0%-90% non-condensing|
|Installation||Up/Down 1/4 inch screw, Left/Right M6 screw|
|VESA connection port||No|
The HL-700HD 7 inch LCD small screen on camera monitor has the following functions:
Function setting button, luminance waveform, waveform hidden, audio meter, time code, focus assistance, high light, ELP (GPS in video), false color, zebra, safety marker, marker scale, aspect ratio self-define function, anamorphic de-squeeze for distortion lens, blue only, mono, aspect ratio, over scan, under scan, pixel-to-pixel (PTP), H/V DELAY, 3D LUT loading, battery with display meter, image flip
1. Power button
2. F1 signal converting
3. F2 luminance waveform
4. F3 marker scale
5. F4 focus assistance
6. F5 image flip
8. Battery input
9. HDMI input
10. HDMI output
11. USB-Mini (software update)
14. DC 12V power input
15. SD card port
16. RUIGE ultra torque connecting port
17. CTRL-ZOOM controller jack
18. Headphone jack
The HL-700HD screen adopts two kinds of luminance waveform of IRE and voltage luminance waveform. The basic function of these two measuring methods is that they can monitoring the range of luminance change of the video signal at real time.
IRE Waveform is used for checking exposure value of shooting spot ,and also it is a necessary tool for testing the camera tolerance by DP or Cinematographer.
There was incompatible issue that there was no way to check the full image while the full size luminance waveform could be checked at the same time. But this screen can realize accurate and real time monitoring of luminance waveform.
16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.
When recording picture signals, the video recorder can generate unique time code for each picture. Each frame has its own number of time code which can be decoded and displayed on the screen as hour, minute, second and frames. All the digital video recorder has the function of time code now.
Ruige P and B series monitors can display two TC codes at the same time: LTC and VITC information.
The HL-700HD can be equipped with zoom controller so that it can realize focus with sharp edges, thus saving focus time and improving focus effect.
High light mode
EBU (European Broadcasting Union) has the stipulation, the brightness of the first class monitor should be within 70 ~ 100cd/m2. Taking the outdoor shooting into account, strong light will affect the viewing on the monitor screen. So the professional, broadcast, film-grade monitors possess backlight adjusting function. After finishing the technical verification of the monitor, increase the brightness of the monitor screen by adjusting backlight so as to facilitate the director to view the details in the images.
Under the mode of false color, the functions of under scan and luminance waveform can be used at the same time. So it is easier to identify parts of the picture which may exceedstandards. When false color is matched with SMPTE color bar, it is helpful to monitor that if the luminance and contrast of the screen can meet the standard.
The level of the zebra of this monitor is adjustable. It can be adjusted from 60% to 100% of the max brightness according to your own habit.
The safety marker of the HL-700HD can be defined from 80%-90% by customers to avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.
Anamorphic de-squeeze for distortion lens
This function can adjust the image shot by anamorphic lens (e.g. 1.3X, 2.0X) to normal display ratio, and you don't need to choose this function in the menu of cameras. The key is, not all ARRI camcorder possesses the function to correct the squeezed images.
The blue only is used for adjustment of the hue and saturation of the image. Meanwhile, it can be used to check the color calibration effect of the monitor.
Different aspect ratio can be chosen according to different signal formats to achieve perfect display effect.
During the making of the video program on net, the display mode and the equipment is the same with that during programming so there is no need to consider the limit of the safety marker with the over scan function. The image displayed on the monitor is that which will be seen by the terminal users.
Usage: Over scan is often used to programming for TV broadcast.
Because of the limit of monitor size and effective pixels, not all the monitors can show fully HD signal. So Ruige monitors use RPD technology (pixel to pixel function) to magnify image parts by parts to realize reappearing of 1080 original pixels.
Usage: This function can be used for the monitor with the resolution less than 1080. To view details, this function can avoid the loss of image detail due to lack of screen performance.
Beyond the normal image, the blanking area of field/horizontal signal is shown on screen.
In SDI signal, there is much useful information which is embedded in the blanking area of field/horizontal signal such as SDI Audio, CC (Closed Caption), etc.. It is necessary to check the information in the blanking area to make sure if these information has been embedded successfully.
3D LUT Loading
HL-700HD can realize loading of 6 1D or 3D LUT at the same time, realizing easy application of LUT calibration, technique and innovation.
Customers can define F key to set up image flip function or auto flip (supported by *HL-700HD) with 180 degree. This equipment is quick and convenient for Steadicam operator and some other conditions.
Battery with display meter
When use battery to supply power to monitors, please enter the menu to 'Auxiliary Function' and open 'Battery Checker'. You will find one Battery meter displayed at the top-right corner of the monitor, calculating the remaining of battery capacity. When capacity is less than 30%, the scale meter color will be changed from Green to Red.
DV-12V AC adapter HL-700D
Input voltage: 100-240V ~0.8A 50/60HZ
Output voltage: DC-12V 2.0A
Certification standard: CE/FCC/3C/UL/ROHS etc.
Product color: black
Application environment: indoor
HL-700HD screen protector
The screen protecting plate of HL-700HD is made of superior resin material, featuring good translucency, impact resistance, light and thin. It can effectively protect the monitor panel from being scratched or impact by outer force.
Linear zoom trigger
Linear Zoom trigger is an assistant accessory for focus assistance. It can be used for adjusting the monitor during shooting. This accessory can also be applied together with pixel to pixel function, achieving fast focus when shooting motion pictures. This linear trigger has obtained a patent. When using it, one side of linear zoom trigger can be inserted in the 'Zoom' hole of monitor, while the other side can be fixed on the balance holder of HDSLR camera or the handle on a tripod, enabling more simple focus.
Andong power line-HL-700HD
Andong power line features type B plug on one end and a standard two pin aviation plug with lock on the other end which is made of fully copper 22AWG 0.5 square meter line with two core.
camera top monitor, video monitor, small LCD screen, monitor