|Resolution||1280 (H) ×800 (V)|
|Dot pitch||0.117 (H) ×0.117 (V) mm|
|Aspect ratio||16:9 / 4:3 switchable|
|Viewing angle||H 178° / V 178°|
|Analogue audio input||RCA×1 (double channels)|
|Audio meter||16 channels (Maximum 8 channels can be displayed at one time)|
|Component||480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60)|
|HDMI||480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60)|
|HD-SDI||1080i/60/59.94/50, 1080p/30/29.97/25/24/24sF/23.98/23.98sF, 720p/60/59.94/50|
|Input voltage||DC 12V standard 4 pin XLR|
|Power consumption (MAX)||≤11W×2|
|Store humidity||0%-90% No condensation|
|Dimension (mm)||L 288×H370×D 256 mm|
|Installation||Rocker arm bracket|
|VESA connecting port||No|
VF-701HDA viewfinder monitor has the following functions:
Function setting button, audio meter, safety marker, blue only, mono, aspect ratio, over scan, under scan, pixel-to-pixel (PTP), safety lock
1. TALLY (indicator)
2. Protection bar
3. Sharpness / PTP
4. Saturation / Color B/W switch
6. Brightness / OSD
7. Status lock / unlock
8. Power indicatorЈredЈ
9. Controller jack
10. TALLY (indicator)
11. VF signal input
12. TALLY brightness adjustment knob
13. TALLY signal input
14. Power switch
16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.
The safety marker of Ruige can avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.
The blue only is used for adjustment of the hue and saturation of the image. Meanwhile, it can be used to check the color calibration effect of the monitor.
Different aspect ratio can be chosen according to different signal formats to achieve perfect display effect.
During the making of the video program on net, the display mode and the equipment is the same with that during programming so there is no need to consider the limit of the safety marker with the over scan function. The image displayed on the monitor is that which will be seen by the terminal users.
Usage: Over scan is often used to programming for TV broadcast.
Because of the limit of monitor size and effective pixels, not all the monitors can show fully HD signal. So Ruige monitors use RPD technology (pixel to pixel function) to magnify image parts by parts to realize reappearing of 1080 original pixels.
Usage: This function can be used for the monitor with the resolution less than 1080. To view details, this function can avoid the loss of image detail due to lack of screen performance.
The safety lock can lock the function keys on the panel, thus avoiding poor shooting effect caused by mis-operation. When the system adjustment is done, just press the LOCK UP button for 3 seconds, the device will automatically enter the locked state. To remove the lock function, press the button for 3 seconds again. When the power is cut off, it remains locked, and will not automatically release.
Jib monitor stand
Full metal jib crane stand is suitable for matching medium, large sized jib in spot shooting.
DC-12V 1 to 2 power source
Sun hood-S701 is made of ABS+PC material so that it is light and convenient for use.
1 to 2 power cable
It has 4 pins XLR which can be used for power supplying by distribution box to jib monitors.
AC power cable
International 220V AC power cable, three-core copper 10A×3×0.75m2, 1.69 meters long.
video equipment, studio Eequipment, desktop monitor